Tuesday, November 4, 2014

Day20 ->Bar magnets, Magnetized pins experiment , Units learned and review, Experimental Excel data sheets with error analysis, presentation of application of various magnets


He is a bar magnet example 
He is acting as the "bar" "magnet"

Drawing field lines 
Prediction of iron filling and distribution of magnetic field lines.
Actual iron filament interact electrically with electric field lines of magnetic force. 

Magnetized pins experiment 


Even after two cuts in half there the smaller is still magnetized although it seems not that strong in the beginning due to the magnetic field lines.



Units learned and review
Units: SI: T = Tesla = N/(A . m)
G = Gauss = 0.1 mT
Magnetic 
Velocity of electron: V(m/s), F(m/s2(N))
V cross B vectors =F vector
Units of constant k calculations?
B: tesla
F: units of F 
A: amp(C/s)
C/s*
kV
k units : charge!
T=N/(A*m)
F=qE












Rules of right hand rule, positive charge for right hand and negative for inverse of right hand force vector or the left hand rule. Usually question states negative charge.




















The force is enacted by the right hand rule. in which x symbolizes the arrow point away from page while dot present arrow point out from the page.

Experimental Excel data sheets with error analysis

Experiment called for cutting the semi circle into 15 parts.

Collection of excel spreadsheet through calculation of 15 different segments.

In this part of lab, the total force on a wire was found by estimation from using a excel spreadsheet. The semicircular wire was calculated of its net force by having 15 segments. θ, sinθ , and F were found for each segment and summed up (refer to the excel picture above). The force can be observed that a maximum at 90 degrees and a minimum on the sides. The equation is net force=BIsin(theta)dl.

Error analysis: The error from this part of the experiment is that there is no error in the calculation, however when propagation method was used in board and applied in maple, the variables in here will not have error inherently but rather from experimental, thus this calculated value is truly an estimate of the broad range of possible error.


Deflection of photon beam by the use of magnetic field B. Similar to a current deflected, which the beam is acting as particle.



Demo of student built horn antenna from taking cover of microwave outer parts off to broadcast 2k watts signals.
North pole is in the front so the wire going from left to right is exerted by a force downward.

Horshoe magnet deflection demonstration. And this one's north pole is in the back has has the wire deflected force upward.









Lorenz Force(French) 
vector F=q vecV cross vecB
describes force on a moving charge
Test

Thursday, October 30, 2014

Lab 19 ->oscilloscope warm up, NPN transistor(depletion zones), The Low Pass Filter, Diode circuit explanation.


We used Ashua's Oscilloscope to learn Voltage current in their relationship with power output.
From this part, we had draw a NPN transistor.

Here, we build a amplifier through the schematics shown in class.:



In physics, the graph of V vs Frequency, we dont count in more than 5 because it reaches good enough efficiency.


For these pictures, the analog oscilloscope was hooked to the function generator to see if similar patterns were recreated in the oscilloscope.


Low Pass Filter

The Low Pass Filter
A circuit was constructed by .1 uF capacitor and 22K resistor. By a tone generator app, one can see the low pass filter can help generate the graph of V vs. Frequency and other important applications when changing the frequency becomes important.
Image result for low pass filter
A more pronouced version of low pass filter.

Diode circuit explanation.
Showing Light bulb light up and as the proportional relationship with lumens vs voltage input from 3 to 4.5 volts of electricity from input box.
This was showing the example of closing the depletion zone and jump of voltage from 0 to 1.2 volts and suddenly the led bulb lights up at 1.35 volts.

Wednesday, October 29, 2014

Lab 18 ->Function generator and speaker. Activities from lab book, Mystery box solution, Error analysis

Setup of the Variac, photon beam deflector apparatus. 

Presentation of how photon beam deflector works.

Function generator
Hooking function generator to speaker for various range of sound in frequency outputs. 



Presenting the fluctuations of sounds through vibration of coils with approximately 8 ohm inside the speaker vibrating at frequency indicated by function generator.





Activities from Lab book


 Mystery box
The middle one was tricky because it shows in function generator but not in multimeter.
Pic of square wave


Sine wave








First beginning to setup

30 hz similar to 3d scoop. 

60 hz similar to a 3d rotated ring.
Error analysis: the errors are not necessarily solvable with variables given because all the apparatus required people to operate and every error is inside each apparatus's specification, thus there were no propagation of errors in operating but there is propagation of error in finding hz and divisions of amplitude of wave forms. From operational point of view, the error can come from apparatus, because there are noise of surrounding. And that noise transformed to the fluctuation as if quantum uncertainty of the waveform distributions as shown in apparatus. Ultimately, the error is derived purely by the environment disturbance and thus we had to be provided with better connector oscilloscope cables to minimize error in this experiment.